Upstand

Task area Components

You can use this tool to draw masonry on the bearing surface of a slab on a wall. The top level of the wall below serves as the bottom level of the upstand.

The options available for entering the element are the same as those for the Wall tool. For the upstand, always use the option with which the wall below it was created.

To draw upstands over walls

1. Click Upstand (How).
   

   Activate Upstand in one of the following ways

   • Actionbar:Role Architecture Task Elements Task area Components

   • Menu bar: Create Architecture Special: Walls, Openings, Components

   • Palette: Tools Create area in the following module(s):

   Special: Walls, Openings, Components

2. Click the wall on which the upstand is to be created. The top level of the wall serves as the bottom level of the upstand.
3. If you want, you can now modify the upstand's parameters.
   Use the options on the context toolbar.
   

   • Click Properties to set the parameters in a dialog box.
   • Click Match properties to copy the settings from an existing element.
   • Click Load favorite to select saved parameter combinations.
4. Select the type on the Upstand context toolbar. It should be the same as the type of the wall below.
   • Upstand over straight wall
   • Upstand over rectangular wall
   • Upstand over curved wall
   • Upstand over circular wall
   • Upstand over polygonal wall (inscribed)
   • Upstand over polygonal wall (circumscribed)
   • Upstand over entity-based wall
   • Upstand over spline-based wall

Note: For more information, click an upstand type.

Note: Upstands can be modified with the following tools:
Delete Section of Linear Component,
Join Components and
Join Component with Line
Select the upstands in a 3D view and not in plan view.