Evaluation of stirrup cages, bent-up meshes and MWS reinforcement groups in lists

Previously, when it came to stirrup cages, bent-up meshes and MWS reinforcement groups (which are also transferred as "stirrup cages"), the secondary bars and then the stirrups or bent-up meshes were listed. A link between the secondary bars or longitudinal bars and the stirrups as well as the bent-up meshes was not detected in the individual plate installations in the list generator .

This has now been changed. Stirrup Cages, Bent-Up Meshes and MWS·Reinforcement·Groups are now grouped. After a line with

• the label and the number of the stirrup cage (e.g. BK 1) or the bent-up mesh (e.g. BM 1) or the MWS reinforcement group (e.g. Mark 1),
• the diameter and length of the stirrup (only with stirrup cages, e.g. 8/100) as well as
• the placing length of the stirrup or mesh (only with stirrup cages and meshes)

then the rows always follow

• with the stirrup (diameter) or meshes (mesh type) and the secondary bars (diameter), their length and their weight (with stirrup cages and meshes) or
• the cross and longitudinal bars (diameter), their lengths and their weights (with MWS reinforcement groups).

Notes: With the MWS reinforcement groups there are now cross bars or longitudinal bars instead of stirrups or secondary bars. In addition, the secondary bars or longitudinal bars with the same diameter are summarized in the list (from length - to length).