Work with identical precast elements in iWall

Back then, in the case of precast walls that were created with Design (iWall), both parameter changes in the palette as well as changes to the secondary reinforcement and manually marked fixtures were automatically transferred to other, identical precast elements in the group.

Exceptions to these were

• manual changes to the basic reinforcement, such as geometry changes including lengthening or shortening bars, the moving, deleting or copying of reinforcement elements with loose and attached reinforcement,
• changes in the Mesh Welding System Editor and changes that are carried out with the Reinforcement in MWS grid function with attached reinforcement, or
• manual changes to automatically calculated fixtures such as lifting bolts, cast-in nuts and fixtures for connecting the wall layers.

With one of the imminent modifications, the corresponding element was unlinked from a group of identical precast elements and has a new mark number.

This has now been chanced such that all previously stated reinforcements and fixtures have also been transferred to the other, identical precast elements in manual changes.

Note: Changes resulting from the use of connections and divisions on an element are not transferred to other, identical elements!