Stacking function is available again

If you have the corresponding access rights, the Stack function will be available again. At the same time, the default settings in Configurations under General, Stack sketch as well as Site facilities, Stack 3D are available once again.

In addition to the previous stacking options of slab and wall elements created via Design in Precast slab as well as Design (iWall) or Design in Precast wall you can also stack precast elements of the basic type = slab and wall now.

Precast elements where the

• Basic type = slab must be horizontal, just like a slab element created with the Design option.
• Basic type = wall must be vertical, just like a wall element created with the Design (iWall) or Design option.

Note: Please note that the Stack function is not automatically installed in the Actionbar . If necessary, add the function in the Actionbar Configurator.

When creating stacking lists with Create element stacking lists in the Slab plan displays, Wall plan displays and Plan displays functions are, upon joint selection of precast elements of the type Slab, Wall and Precast Element

• within the slab task area, slab elements and horizontal precast elements where basic type = slab,
• within the wall task area, wall elements and vertical precast elements where basic type = wall as well as
• within the precast element task area, slab elements, wall elements as well as horizontal and vertical precast elements where the basic type = slab and wall

are listed.