Improved processing of elements with identical mark number

If under Catalogs with the design mode in question under Design, the positioning for issuing the mark number is also set with the identical option and in Configurations under General, that the program sequence on the Rearrange tab has the Split precast element groups according to - drawing files option is deactivated, meaning that precast element groups are also possible via drawing files, then the program is improved.

Every time several drawing files are loaded (active, active in background) a check is carried out by the program to see if all precast element groups across drawing files is identical (meaning identical mark numbers and also incl. an additional text as well as identical geometry, fixtures, reinforcement if necessary).

If the condition is not fulfilled and if identical marks are found in the loaded drawing files with different precast elements, then a note initially appears that editing and modification of the elements may result in potentially unwanted deletion and/or duplication of the reinforcement and/or fixtures as a result of automatic synchronization. To avoid this, either deactivate drawing files or immediately reposition the relevant precast elements. Alternatively, you can also select the Split precast element groups according to - drawing file option.

After closing the message with OK hen a more precise list of the differences appears in a dialog.