Icons extended for visibility of fixtures in MWS Editor

Previously, when displaying a mesh with attached reinforcement via Mesh Welding System Editor only the fixtures could be shown or hidden that come into contact with the bars of the mesh in question (EBT cutting = no) and/or cut (EBT cutting = yes).

This is now extended so that fixtures outside the mesh under consideration and do not come into contact with it (EBT outside cutting bars = no) and (EBT outside cutting bars = yes), can be shown in MSA Editor.

In the case of the fixtures that are outside the mesh in question, only the fixtures that are on the relevant side of the element are always shown. Fixtures on both sides of the element can be displayed on both sides.