New presentation parameters

The settings in the Presentation area were amended and expanded in the Generate / Modify View and Generate / Modify Section palettes.

• The name Reference scale for calculation was renamed to Reference scale for 2D and 3D foils in the Generate View and Generate Sectionfunctions to highlight what this setting does.
  The value configured here is also used on the one hand for the presentation of smart symbols and fixtures which have foils with different scale ranges for a single view type, as well as for the reference scale for the drawing file if you generate the view using the building structure, or if you save your result on a different drawing file than the one that is currently active.
• With the new Basic·reinforcement·precast·elements option, you can define whether the longitudinal and cross bars of the basic reinforcement are created as passive elements to reduce data volume and increase performance of precast elements. If this option is disabled, the reinforcement will indeed be drawn but it cannot be modified in this state.
  
  Note: Manual presentation changes for an “active” reinforcement (such as placement display amended to Show middle bar only or Dimension Line added) are lost when it becomes passive.
• With the new Fixtures·as·wireframe·model option, you can define whether to show the fixtures as a wireframe model, so that you can see the fixtures better.
  
  Note: Setting the Presentation as a wireframe model option under Options now no longer has an impact on the presentation of the fixtures.