Layout catalog, labeling of symbol fixtures on the dimension line

The labeling of symbol fixtures on the dimension line is now active for the absolute dimensioning.

To do this, select the absolute option under Catalogs, General, Layout catalog on the Dimension lines tab under Horizontal and/or Vertical dimension lines for the Dimension parameter.

Then select the As per labeling option on the Dimensioning tab in the Fixtures group under Special dimensions for fixtures. For Dimension lines additional text, select one of the horizontal, vertical or horiz+verti. options and define the template for labeling. You can use the Allplan Formula editor here to define additional text as the labeling for fixtures on the dimension line.

Note: Please note the Dimensioning Point(s) setting must be selected for the corresponding fixtures under Catalogs, General in the Fixture catalog on the Element Plan 1 tab for the Dimensioning Points parameter. When setting the Min-Max Points, there is no labeling for the corresponding symbol fixtures.