Presentation of bending shape in plan view or on element plan

In the floor plan and on the element plan, the bending shape symbols were previously drawn exactly on the support edge when entering bar overlap = 0 . However, when creating the bars, the bars were shortened by the configuration setting Fixed value (bar overlap = 0). With the change in Allplan, the bending shape symbols are now also offset by this value.

Note: This applies only to new placements and to existing placements where the span direction or the supports involved are changed. For existing placements with no change, you will still have the old representation.

For wall element designs created using the Design (iWall) function, the bending shape symbols of the Basic reinforcement (for each reinforcement unit) at element edges are now shifted by the Lateral concrete cover when you enter a Bar overlap = 0. For recess edges, the Lateral concrete cover (per reinforcement unit) applies, which is set on the Reinforcement of openings tab.