FRAME_D

FRAME_D generates a frame with its outer polygon in the XY plane; in comparison with FRAME it is possible to set 4 different values for the thickness of the frame.

Furthermore you can define holes and create segments and arcs in the polyline.

Syntax

FRAME_D n, bottom, right, top, left, w , h , x1, y1, ... xn, yn

Parameters

n (integer): number of polygon nodes.

bottom (decimal): segment starts at the left side and ends at the right side of the min-max-box.

right (decimal): in positive Y direction and on the right side of the min-max-box.

top (decimal): segment starts at the right side and ends at the left side of the min-max-box.

left (decimal): in negative Y direction and on the left side of the min-max-box.

h (decimal): height of the frame.

xi, yi (decimal): X resp. Y coordinate of the polygon nodes 1 ... n.

si (decimal): status code that allows you to define holes and create segments and arcs in the polyline using special constraints.

parameter restrictions: n ³ 3

Remarks

Each polygon has at least one top and one bottom segment.

The side segments (left and right) are optional.

If a polygon has unified colinear segments, there is a maximum of one side segment.

Usable since script version 2.0 (Allplan 2014-1).