Place manufacturer's fixture

Tool(s): Place HALFEN-DEHA Fixture + Place PEIKKO Fixture + Place SCHOECK Fixture + Place PHILIPP Fixture

The manner in which you define the exact position of a fixture depends on where you place it: in an architectural slab or wall, in views or sections or in a 3D object.

To place a manufacturer-specific fixture

• The procedure for defining the drop-in point varies depending on the component type:
  • In the case of architectural slabs or walls, specify the drop-in point by entering coordinates in plan and enter the depth values of the fixture within the component.
    Notes: When placing 3D fixtures, you can also define the drop-in point in an isometric view.
    For walls, you can enter an offset to any reference point.
    If the drop-in point of the fixture is not within the architectural component, the system does not prompt for the depth values.
  • In the case of views and sections, define the drop-in point by entering coordinates within a view of the component, and to define the missing coordinates, click another point in a reference view.
  • You can define the drop-in point by entering coordinates in an isometric view for all the other 3D objects.