Area reinforcement: edge reinforcement

Tool(s): Enter Area Reinforcement

To create edge reinforcement as area reinforcement

1. Click Enter Area Reinforcement (How). On the context toolbar, select Edge Reinforcement
   Or
   On the Engineering toolbar, Area Reinforcement flyout, select Edge Reinforcement.
   

   Puede activar Armado den superficie de una de estas formas

   • Barra de menú: Crear Ingeniería Armadura de barras

   • Paleta: Funciones , Crear, en los siguientes módulos:

   Armadura de barras

2. If you work in Reinforce with 3D model mode, you need to select an existing view to which you want to add edge reinforcement.

   Note: If there are no views, you cannot create edge reinforcement.

3. Enter the edge area or click Match in the input options to use an existing edge area.
4. Modify the edge line using the tools provided on the context toolbar and define the location of the placement in space so as to establish the relationship (offset) between the defined spatial plane and the placement (with Reinforce with 3D model only).
5. Click OK to confirm the settings.
6. Enter settings for the general placing parameters.
7. Click OK to confirm the settings.