Connecting bar (placement)

Tool(s): Coupler, Thread, Connecting Bar

You can use Connecting bar (placement) to apply connecting bars or threads to placements. The connecting bars/threads are only created for the corresponding placement. The modified placement gets a new mark number (if there are more placements of the original mark).

To apply connecting bars or threads to placements

1. Click Coupler, Thread, Connecting Bar (How).
   

   Activate Coupler, Thread, Connecting Bar in one of the following ways

   • Actionbar:Role Engineering Task Reinforcement Task area Bar reinforcement

   • Menu bar: Create Engineering Bar Reinforcement

   • Palette: Tools Create area in the following module(s):

   Bar Reinforcement

2. Select the required manufacturer.
3. Click Connecting bar (placement) or click OK if the appropriate manufacturer and tool are already selected.
4. Use the input options to specify whether the bar segment is to be lengthened or not when the connecting bar/thread is created.
5. Click the end of a placed bar where you want to create the lock nut of the connecting bar or the thread. Requirement: The bar end in question must not have a hook.
6. Click the coupler for which you want to create a connecting bar. The program checks whether the selected coupler matches the diameter of the selected bar. In addition, load type is taken from the coupler clicked when you use the SAH thread bar coupling system.

   The Selection of Articles dialog box opens and you can select a catalog. The connecting bars/thread appropriate to the diameter is/are displayed.
   Clicking a manufacturer in the tree view displays information on this manufacturer in the right pane. Click Options ... to specify whether the Selection name or the Company name is displayed in the tree view.

7. Click OK to confirm the articles selected.

   After having checked the boundary conditions, the program adds symbols representing the lock nut of the connecting bar or the thread to the placement and the relevant schema bar. With the lengthened option, the relevant bar segment is lengthened by the value specified for the coupler clicked or by the thread length. If there are more placements of the mark, a new mark number will be assigned. In addition, the label for the schema bar includes information on the lock nut of the connecting bar/thread.
   

   

   Checking the boundary conditions

   When couplers, threads and connecting bars are created, the program checks certain boundary conditions. When these conditions are not adhered to, the program displays an appropriate message and does not create the relevant couplers, threads and connecting bars.

   The program checks the following boundary conditions:

   • Minimum distance of coupler or lock nut to bend
   • Distance of bars placed (spacing) for end anchorage and partially for coupler connections.
     The minimum distance must be observed when coupler connections are created. Otherwise, the torque wrench cannot be used.

   Note: The program does not check the edge-to-edge offset and the axial spacing between bars placed individually (single placement) or between neighboring placements!
   Observing these conditions is the responsibility of every individual user.

Note: Whereas the name of the coupling system is always included in schema labels for bars with couplers or threads and for connecting bars, this information only appears in labels for the placement when the Steel grade parameter is selected.