Assigning line types during import

General notes

• Allplan supports 99 different line types. If more than 99 are transferred, types 99 and higher have to be assigned Allplan numbers between 1 and 99.
• When the Line type definitions check box is enabled in the Interfaces Options (ODX), Allplan 2020 specific tab, the Allplan line type definitions are overwritten by the line type definitions in the DXF file.
• Important: If the project has been defined so that the line type settings are based on the office standard, the office standard and all projects based on it can be modified.

  

• If the Line type definitions check box is disabled in the Interfaces Options (ODX), Allplan 2020 specific tab, the Allplan line type definitions are retained.