Up and Over Door SmartPart

Using the Elements tab, you can select and define settings for the elements of the Up and Over Door SmartPart.

Note: When you slowly move the cursor horizontally across the parameters, it changes to a double-headed arrow as soon as you reach the area between the parameter names and the boxes. You can now change the width of this area.

Elements tab

Settings

Position: When you select In opening, the SmartPart orients itself to the reveal. If you created the opening with a reveal, Allplan places the SmartPart for the Up and over door in the middle of the reveal. If there is no reveal, Allplan places the panel (Thickness 1) in the opening; the other elements are outside the opening.

When you select Behind opening, the program places the SmartPart for the up and over door behind the opening, regardless of the reveal. When you place the SmartPart, it orients itself to the outer edges of the wall. The SmartPart then rests on the wall (outside or inside).

Opened by %: Enter the percentage by which the door is open.

Door leaf

Type: Select the panel type: Smooth, Panels, Matchboards
Enter the dimensions 1-5 (see graphics).

Angle: If you have set the type to Matchboards, you can enter an angle by which you want to arrange the matchboards.

Show handle: You can choose to show a handle.

Offset to BL: You can enter the distance between the handle and the leaf bottom.

Hardware

Enter the dimensions for the track and the arm.

Ceiling bracket: When you select this option, a ceiling bracket will be created for the tracks. You can enter a value for the BL of ceiling, thus defining the length of the bracket.

Frame

Width / Depth (6+7): Enter the dimensions of the frame.

You can find detailed information on the following tabs here:

You can find the following tools at the bottom of the palette:

Load favorite: You can retrieve SmartParts saved as favorite files (smv files).
Save as a favorite: You can save the current SmartPart as a favorite file (*.smv).
Info: Displays the version number of this program, copyright and some legal notes. In addition, you can find a link to Allplan Connect.
Settings: You can open the Settings dialog box, where you can see and change the settings of the SmartPart.
Close: Click the Close button to quit the palette. Allplan saves the entries.

Note: When you place or select a SmartPart, an arrow appears in the middle of the SmartPart, indicating the outside of the SmartPart. Depending on the position of the SmartPart within the opening, you can see another symbol, indicating that the SmartPart was mirrored when it was placed. You can set the size and color of these symbols using the Size of CursorTips for snap points and Color of CursorTips options you can find in the Options (How) - Point snap page - Point snap representation area.