Fit, Spacing Characteristic

Parameters for 'Fit'

You can use this to specify whether the spacing values in the following menu fields are based on axis dimensions (Centers) or on the spacing between the boundary lines (Delta) of the individual units.

To switch from ‘Delta’ to ‘Centers’

1. Click the button marked Spc Ch.
2. Set the reference point for the centers/axes.
   The spacing is applied from this reference point.

To switch from ‘Centers’ to ‘Delta’

• If you have already set the reference point for the axis: Click the button marked Spc Ch with the left mouse button.
• If you have not set the reference point for the axis yet: Press the right mouse button to cancel.