Geometric modification
Tool(s): Modify Shell
- Click
to define openings within the previously defined polygon. - Click
to delete openings within a polygon. - Click
to modify the projecting ends of the bars.
If Reinforce with 3D model is active, then the following boxes are also provided:
- Click
Layer Depth to define the distance between the placement and the principal spatial plane. You can enter the value manually or use the layer depth in a view that is orthogonal to the reference view. To adopt the layer depth, click the layer in the corresponding view. - Click
Component Thickness or one of the buttons
/
/
to create the relationship for the opposite layer. - Click
Concrete Cover Top or one of the buttons
/
/
to define the distance of the bar in relation to the upper edge of the component. - Click
Concrete Cover Bottom or one of the buttons
/
/
to define the distance of the bar in relation to the lower edge of the component.