Module(s): Frame Construction: Rafters, Roof Beams, Posts
You can use the Roof Beam tool to create roof beams.
To place a roof beam
(A) Rafters
(B) Roof beam
(C) Spacng - enter a distance in plan (dependent on the roof beam’s offset direction)
(D) Bottom - enter the height relative to the bottom of the roof beam
(E) Top - enter the height relative to the top of the roof beam
(F) Datum level (plan)
(G) Insertion depth of beam
Note: You can only define the insertion depth in the Properties if you clicked a rafter when defining the height of the roof beam.
Note: If only the roof beam’s dimensions (width, height, and insertion depth) are known and not the height at which it is to be placed, the position of the roof beam in plan is calculated automatically. To do this, use the Spacng, Bottom and Top functions in the Input options.
(C) Allplan GmbH | Privacy policy |