Drop-In Points of Fixtures

Tool(s): Place SCHÖCK Fixture

With the exception of Schöck Isokorb® type K-corner, the default drop-in point for all fixtures is the top right corner of the thermal insulation element (on the side of the balcony). The drop-in point for Schöck Isokorb® type K-corner is determined in clockwise direction based on the subsequent placing method for fixtures.

Due to the position of the drop-in point, it makes sense to start placing the fixtures on the left (viewing the slab or wall from the exterior side). The exterior side of the fixture (side of the balcony) is identified with a triangle symbol and is at the bottom when you begin with the placement.
When the front edge of the Isokorb fixture and the exterior side of the wall (or the insulation layer) are the same, you can place the fixtures directly without having to specify an offset. When the Isokorb fixture, on the other hand, is located in the exterior insulation layer (or in front of the wall with type V), use the options available for entering points in the dialog line.